An automobile antitheft system Biocode Auto-150, developed in accordance with the insurance companies’ requirements, is designed to create a powerful automobile security complex preventing hijacking and capture. With the help of a special scanner the system identifies a car owner by a fingerprint and it excludes any possibility of signal intercept and unauthorized access in a guarded car. Provided integration outputs can be connected to an alarm system, central lock controller as well as to various satellite and radio channel monitoring systems, allowing to control and prevent completely any attempt of hijacking and unauthorized penetration in a car.
Fingerprints comparison is carried out by dozens of characteristics and provides 100 % guarantee of sure reading in various conditions. Thanks to application of intellectual digital remote blocking relays (RDU, RDUK or RDD), operated by a regular electric wiring, in a case of unauthorized access a car engine will be reliably blocked.
When the RDU or RDUK relays are used, an engine is blocked after the ignition switching on, while the RDD relays with a movement sensor allow to maintain remote unattended startup and to block an engine only when a car begins to move.
Digital remote blocking relays, executed with normally closed contacts, provide protection from searching for car blocked circuits by means of diagnostic equipment. To increase installation secrecy the RDU and RDD relays are executed in the form of usual regular automobile relays. And thanks to the embodiment of the RDUK relay, it becomes possible to install it by means of plaiting it into the “braid” of a regular car wiring. Quantity of relays installed in a car is not limited.
The Biocode Auto-150 system has series of anti-robbery functions preventing forcible car capture. They are as follows: a fingerprint inquiry every time a driver’s door is opened and subsequent brake stepping is done, as well as an “alert finger ” mode – when a car owner, in case if perpetrators force him to start the engine, puts a finger, status of which is “alert” in the users’ database, to the scanner, and after 5 minutes the engine is blocked.
It is possible to connect RZ relay to the Biocode Auto-150 system for bonnet electromechanical lock control that will allow to create antitheft complex with protection of blockings located in under-bonnet area. Bonnet electromechanical lock installation with fingerprint control in a car considerably increases car security from carjacking and excludes a possibility of blocking removal by perpetrators.
The Biocode Auto-150 system does not require availability of a computer onstream – recording and removal of users are carried out by means of “the master finger”. Up to 100 fingerprints can be registered in the system memory.
The system can be installed in any type of cars and does not derange functioning of regular electronics. The state of the art technology of data transmission where the original way of modulation is used provides impossibility of interception of a code-grabber monitoring signal.
Software that is included into the delivery set allows to make adjustments of various system operating modes easily. Types of signal adjustment on integration outputs will allow a car owner to work out any required scenario of counteraction to any action of perpetrators. For example, the system can either block the movement of a car immediately after an attempt of hijacking or capturing, or secretly send an alarm signal to the control panel of an operative person on duty, if a car is equipped with a tracking system. Adjustment flexibility of the Biocode Auto-150 system allows to combine in a unified complex practically all security systems that are available in the market at the moment
Technical characteristics:
maximum identification time – no more than 2 sec.
maximum fingerprints quantity saved in memory – 100 pieces
quantity of connected RDU, RDUK, RDD relays – is not limited
maximum relay switched current – 15 A
each relay power consumption – no more than 1 W
control unit power consumption (without a relay) – no more than 3 W
working temperature – from -40C up to +80C
relative air humidity at temperature +25C – 98 %
feed – from a car direct current network (voltage from 9 V up to 15 V)
control unit overall dimensions – 110×55x30 mm
fingerprint scanner overall dimensions – 40×30x70 mm
control unit weight – no more than 0,2 kg
fingerprint scanner weight – no more than 0,1 kg
Delivery completeness:
control unit – 1 piece
fingerprint scanner – 1 piece
remote blocking relay – 1 piece
connecting cable – 1 piece
alarm light-emitting diode with cable – 1 piece
VALET button with cable – 1 piece
USB cable – 1 piece
CD with software – 1 piece
complete set of fixture location bracketry
envelope with PIN-code
user’s guide
installation and programming instruction
Filed under: Công nghệ cao
